Systems with Constant Mass Fl
ow For systems with heat exchanger, the mass of the pollutants MGAS (g/test) shall be determined from the following equation: MGAS = u x conc x MTOTW wher
e u = ratio between density of the exhaust component and density of diluted exhaust gas, as reported in Table 4, point 2.1.2.1 conc = average background corrected concentrations over the cycle from integration (mandatory for NOx and HC) or bag measurement (ppm) MTOTW = total mass of diluted exhaust gas over the cycle as determined in section 2.2.1 (kg) As
...[+++] the NOx emission depends on ambient air conditions, the NOx concentration shall be corrected for ambient air humidity with the factor k H , as described in section 2.2.2. Concentrations measured on a dry basis shall be converted to a wet basis in accordance with section 1.3.2 2.2.3.1.1.Systeme mit konstantem Massendurchs
atz Bei Systemen mit Wärmeaustauscher ist die Schadstoffmasse MGAS (g/Prüfung) anhand der folgenden Gleichung zu berechnen: MGAS = u x conc x MTOTW In dieser Formel bedeutet: u = Verhältnis zwischen der Dichte des Abgasbestandteils und der Dichte des verdünnten Abgases, wie in Abschnitt 2.1.2.1 Tabelle 4 angegeben conc = mittlere hintergrundkorrigierte Konzentrationen über den gesamten Zyklus aus Integration (obligatorisch für NOx und HC) oder Beutelmessung (ppm) M TOTW = Gesamtmasse des verdünnten Abgases über den gesamten Zyklus gemäß Abschnitt 2.2.1 (kg) Da die NOx -Emission von den Bedingungen der U
...[+++]mgebungsluft abhängig ist, ist die NOx-Konzentration unter Berücksichtigung der Feuchtigkeit der Umgebungsluft mit Hilfe des Faktors k H gemäß Abschnitt 2.2.2 zu korrigieren: Die auf trockener Basis gemessenen Konzentrationen sind gemäß Abschnitt 1.3.2 in Feuchtwerte umzuwandeln. 2.2.3.1.1.