Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Activate pulp control machine
Adjust cylinder valves
Cabin pressure control valve
Checking valves
Control of foodstuffs
Control pulp control machine
Cylinder valve operating
Cylinder valves operating
Discharge valve
Food analysis
Food control
Food inspection
Food test
High and intermediate pressure bleed control valve
Launch bar control valve return check valve
Monitor valves
Operate cylinder valves
Operate pulp control machine
Operating pulp control machine
Pass valve
Pressure control forward discharge valve
Pressure control valve
Pressure controller
Relief valve
SCV
Skid control system valve
Skid control valve
Valves checking
Valves monitoring

Übersetzung für "Control valve " (Englisch → Deutsch) :

TERMINOLOGIE
skid control valve (1) | skid control system valve (2) [ SCV ]

Antiskid-Steuerventil [ SCV ]


cabin pressure control valve | pressure control forward discharge valve | pressure controller

Kabinendruckregler


discharge valve | pass valve | pressure control valve | relief valve

Ablassventil | Drucksteuerventil | Überdruckventil


high and intermediate pressure bleed control valve | HP/IP bleed control valve

HD-und ZD-Umschaltventil | Hochdruck-und Zwischendruckumschaltventil


pressure control forward discharge valve | cabin pressure control valve | pressure controller

Kabinendruckregler


launch bar control valve return check valve

Rückschlagventil des Katapultdeichsel-Steuerventils


cylinder valve operating | cylinder valves operating | adjust cylinder valves | operate cylinder valves

Flaschenventile regulieren | Zylinderventile regulieren | Flaschenventile einstellen | Zylinderventile einstellen


checking valves | valves monitoring | monitor valves | valves checking

Ventile kontrollieren


control pulp control machine | operating pulp control machine | activate pulp control machine | operate pulp control machine

Zellstoffsteuerungsmaschine bedienen


food inspection [ control of foodstuffs | food analysis | food control | food test ]

Lebensmittelüberwachung [ Lebensmittelanalyse | Lebensmittelkontrolle | Lebensmitteluntersuchung ]
IN-CONTEXT TRANSLATIONS
The denominator(s) for monitors of Variable Valve Timing (VVT) and/or control systems shall be incremented if the component is commanded to function (e.g., commanded ‘on’, ‘open’, ‘closed’, ‘locked’, etc.) on two or more occasions during the driving cycle or for a time greater than or equal to 10 seconds, whichever occurs first.

Der (die) Nenner der Überwachungsfunktionen der variablen Ventileinstellung („Variable Valve Timing“: VVT) und/oder von Steuersystemen ist (sind) zu erhöhen, wenn das Bauteil zweimal oder öfter während des Fahrzyklus bzw. für 10 Sekunden oder länger, je nachdem was zuerst eintritt, aktiviert wird (z. B. auf „ein“, „offen“, „geschlossen“, „gesperrt“ usw. geschaltet wird).


The vehicle may have a second ECU compared to the parent vehicle, provided that the ECU is only used to control the injectors, additional shut-off valves and the data acquisition from additional sensors.

Das Fahrzeug kann abweichend vom Stammfahrzeug mit einem zweiten elektronischen Steuergerät ausgestattet sein, sofern dieses Steuergerät nur zur Steuerung der Einspritzdüsen, zusätzlicher Absperrventile und der Erfassung der Daten zusätzlicher Sensoren dient.


Certain parts, such as the pedal and its bearing, the master cylinder and its piston(s) (hydraulic systems), the control valve (hydraulic or pneumatic systems), the linkage between the pedal and the master cylinder or the control valve, the brake cylinders and their pistons (hydraulic or pneumatic systems), and the lever-and-cam assemblies of brakes, shall not be regarded as liable to breakage if they are amply dimensioned, are readily accessible for maintenance, and exhibit safety features at least equal to those prescribed for other essential components (such as the steering linkage) of the vehicle.

Bestimmte Teile wie das Bremspedal, die Pedallagerung, der Hauptbremszylinder und seine Kolben (bei hydraulischen Bremsanlagen), das Bremsventil (bei hydraulischen oder pneumatischen Bremsanlagen), die Verbindung zwischen Bremspedal und dem Hauptbremszylinder oder Bremsventil, die Bremszylinder und ihre Kolben (bei hydraulischen oder pneumatischen Bremsanlagen) sowie die Bremshebel mit Spreiznocken werden als nicht störanfällig angesehen, vorausgesetzt, diese Teile sind ausreichend bemessen und für die Wartung leicht zugänglich und weisen Sicherheitsmerkmale auf, die mindestens den für andere wichtige Fahrzeugteile (wie für das Lenkgestä ...[+++]


Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves

Armaturen und ähnliche Apparate für Rohr- oder Schlauchleitungen, Dampfkessel, Sammelbehälter, Wannen oder ähnliche Behälter, einschließlich Druckminderventile und thermostatisch gesteuerte Ventile


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
It has six main product lines, namely control valves, natural gas solutions, pressure relief and safety valves, measurement systems, compression and power systems, and air and gas handling.

Dresser verfügt über sechs Produktlinien, nämlich Regelventile, Erdgaslösungen, Überdruck- und Sicherheitsventile, Messsysteme, Kompressions- und Stromversorgungssysteme sowie Luft- und Gaszuführung.


Valves with additional means for failure detection intended for the control of dangerous movements on machinery.

Ventile mit zusätzlicher Ausfallerkennung für die Steuerung gefährlicher Maschinenbewegungen.


A control system consisting of two pressure control valves PCV1 and PCV2 is necessary for proportional splitting by controlling the pressures in EP and DT.

Das aus den beiden Druckregelventilen PCV1 und PCV2 bestehende Reglersystem wird benötigt, damit eine verhältnisgleiche Aufteilung mittels Regelung der Drücke im EP und DT erfolgen kann.


2.2.1.2.7. Certain parts, such as the pedal and its bearing, the master cylinder and its piston(s) (hydraulic systems), the control valve (hydraulic and/or pneumatic systems), the linkage between the pedal and the master cylinder or the control valve, the brake cylinders and their pistons (hydraulic and/or pneumatic systems), and the lever-and-cam assemblies of brakes, shall not be regarded as liable to breakage if they are amply dimensioned, are readily accessible for maintenance, and exhibit safety features at least equal to those prescribed for other essential components (such as the steering linkage) of the vehicle.

2.2.1.2.7 Bestimmte Teile wie das Bremspedal, die Pedallagerung, der Hauptbremszylinder und sein(e) Kolben (bei hydraulischen Bremsanlagen), das Bremsventil (bei hydraulischen und/oder pneumatischen Bremsanlagen), die Verbindung zwischen Bremspedal und dem Hauptbremszylinder oder Bremsventil, die Bremszylinder und ihre Kolben (bei hydraulischen oder pneumatischen Bremsanlagen) sowie die Bremswellen der Bremsen werden als nicht störanfällig angesehen, vorausgesetzt, daß diese Teile ausreichend bemessen und für die Wartung leicht zugänglich sind sowie Sicherheitsmerkmale aufweisen, die mindestens den für andere wichtige Fahrzeugteile (wie ...[+++]


2.2.1.2.7.certain parts, such as the pedal and its bearing, the master cylinder and its piston(s) (hydraulic systems), the control valve (hydraulic and/or pneumatic systems), the linkage between the pedal and the master cylinder or the control valve, the brake cylinders and their pistons (hydraulic and/or pneumatic systems), and the lever-and-cam assemblies of brakes, shall not be regarded as liable to breakage if they are amply dimensioned, are readily accessible for maintenance, and exhibit safety features at least equal to those prescribed for other essential components (such as the steering linkage) of the vehicle.

" 2.2.1.2.7 . Bestimmte Teile wie das Bremspedal , die Pedallagerung , der Hauptbremszylinder und sein(e ) Kolben ( bei hydraulischen Bremsanlagen ) , das Bremsventil ( bei hydraulischen und/oder pneumatischen Bremsanlagen ) , die Verbindung zwischen Bremspedal und Hauptbremszylinder oder Bremsventil , die Bremszylinder und ihre Kolben ( bei hydraulischen oder pneumatischen Bremsanlagen ) sowie die Bremswellen der Bremsen werden als nicht störanfällig angesehen , vorausgesetzt , daß diese Teile ausreichend bemessen und für die Wartung leicht zugänglich sind sowie Sicherheitsmerkmale aufweisen , die mindestens den für andere wichtige Fahr ...[+++]


2.2.1.2.7. for the purposes of item 2.2.1.2.5, certain parts, such as the pedal and its bearing, the master cylinder and its piston or pistons (hydraulic systems), the control valve (pneumatic systems), the linkage between the pedal and the master cylinder or the control valve, the brake cylinders and their pistons (hydraulic and/or pneumatic systems), and the lever-and-cam assemblies of brakes, shall not be regarded as liable to breakage if they are amply dimensioned, are readily accessible for maintenance, and exhibit safety features at least equal to those prescribed for other essential components (such as the steering linkage) of the ...[+++]

2.2.1.2.7. Für die Anwendung des Absatzes 2.2.1.2.5 werden gewisse Teile, wie das Pedal, die Pedallagerung, der Hauptzylinder mit seinen Kolben (bei hydraulischen Bremsen), das Bremsventil (bei pneumatischen Bremsen), die Verbindung zwischen Pedal und Hauptzylinder oder Verteiler, die Bremszylinder und ihre Kolben (bei hydraulischen und/oder pneumatischen Bremsanlagen) sowie die Bremswellen der Bremsen nicht als störanfällig angesehen, vorausgesetzt, daß diese Teile ausreichend bemessen, für die Wartung leicht zugänglich sind und Sicherheitsmerkmale aufweisen, die mindestens denen für die übrigen wichtigen Fahrzeugteile (wie z.B. für das ...[+++]


w