Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Abrasive wheel using
Apply oil to wheels of railway vehicle
Disc wheel
Dispensary
Eccentricity
Health care centre
Health centres
Hot wheel detection system
Hot wheel detection systems
Lubricate rolling stock wheels
Lubricate wheels of rolling stock
MLG wheel
Main landing gear wheel
Main wheel
Medical centre
NLG wheel
NLG wheel well
Nose LDG gear wheel
Nose landing gear whee
Nose landing gear wheel well
Nose wheel
Nose wheel well
Nose wheelwell
Nosewheel
OUT of centre of wheel
OUT of true of wheel
Oil rolling stock wheels
Operate abrasive wheel
Rail wheel temperature alarm
Rail wheel temperature sensor
Use abrasive wheel
Using abrasive wheel
Wheel centering device
Wheel centring device
Wheel with solid centre

Übersetzung für "Wheel centre " (Englisch → Deutsch) :

TERMINOLOGIE
wheel centering device | wheel centring device

Radzentriervorrichtung




eccentricity | OUT of centre of wheel | OUT of true of wheel

Exzentrizität eines Rades | Rundlauffehler eines Rades


operate abrasive wheel | using abrasive wheel | abrasive wheel using | use abrasive wheel

Schleifscheibe benutzen


hot wheel detection systems | rail wheel temperature alarm | hot wheel detection system | rail wheel temperature sensor

Heißläuferortungssysteme


apply oil to wheels of railway vehicle | lubricate wheels of rolling stock | lubricate rolling stock wheels | oil rolling stock wheels

Räder von Rollmaterial schmieren | Eisenbahnfahrzeugräder schmieren | Räder von rollendem Material schmieren


nose landing gear wheel well | NLG wheel well | nose wheel well | nose wheelwell

Bugfahrwerknische | Bugfahrwerkraum


NLG wheel (1) | nose LDG gear wheel (2) | nose landing gear whee (3) | nosewheel (4) | nose wheel (5)

Bugrad


main landing gear wheel (1) | MLG wheel (2) | main wheel (3)

Laufrad


medical centre [ dispensary | health care centre | health centres(UNBIS) ]

medizinisches Zentrum [ Ambulanz | Einrichtung für ambulante Behandlung ]
IN-CONTEXT TRANSLATIONS
— for undertaking CLN: the distribution through steel service centres; steel wheel production for cars, motorcycles, commercial and industrial vehicles and the production of pressed components for cars and commercial vehicles,

CLN: Vertrieb über Stahl-Servicecenter; Herstellung von Stahlrädern für Pkw, Motorräder und verschiedene Nutzfahrzeuge sowie von Pressteilen für Pkw und Nutzfahrzeuge.


‘axle’ means the common axis of rotation of two or more wheels whether power-driven or freely rotating, and whether in one or more segments located in the same plane perpendicular to the longitudinal centre-line of the vehicle.

„Achse“ bezeichnet die gemeinsame Drehachse von zwei oder mehr kraftbetriebenen oder frei drehbaren Rädern, die die aus einem oder mehreren Abschnitten bestehen kann, der (die) auf derselben Ebene senkrecht zur Längsmittelebene des Fahrzeugs angeordnet ist (sind).


Where a vehicle on a tilted testing platform is resting on its centre stand and just one wheel and when this vehicle may be maintained in a position with either the centre stand and the front wheel in contact with the testing platform or the centre stand and the rear wheel in contact with the testing platform, the tests as described in points 3.4.2 to 3.4.3.3 shall be conducted solely with the vehicle resting on the centre stand and its rear wheel in contact with the testing platform.

Wird ein Fahrzeug auf einer geneigten Prüfplattform von dem Mittelständer und nur einem Rad gestützt, und kann das Fahrzeug entweder durch den Kontakt des Mittelständers und des Vorderrads bzw. den Kontakt des Mittelständers und des Hinterrads mit der Prüfplattform in Position gehalten werden, sind die unter den Nummern 3.4.2 bis 3.4.3.3. beschriebenen Prüfungen nur auf die Weise durchzuführen, dass das Fahrzeug über den Mittelständer und das Hinterrad Kontakt mit der Prüfplattform hat.


At all angles of horizontal rotation up to 90° each side of the longitudinal centre line of the device, there shall be an angle of free axial roll each side of the vertical centre line of 25° for three- and four-wheel vehicles or 40° for two-wheel vehicles.

Bei allen waagerechten Drehwinkeln bis 90° auf beiden Seiten der Längsmittellinie der Vorrichtung muss eine axiale Verdrehung auf beiden Seiten der senkrechten Mittellinie möglich sein, die bei drei- und vierädrigen Fahrzeugen 25° und bei Zweirädern 40° beträgt.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
twinned wheels’ means two wheels mounted on the same axle which are considered to be one wheel, whereby the distance between the centres of their areas of contact with the ground is equal to or less than 460 mm.

Doppelrad“ zwei auf einer Achse montierte Räder, die als ein Rad angesehen werden und bei denen der Abstand zwischen den Mittelpunkten der Aufstandsflächen der Reifen auf der Fahrbahn 460 mm oder weniger beträgt.


The distance between the uppermost and the lowermost points of the spray suppression system (mudguard and outer valance) measured in any cross section perpendicular to the mudguard (see figures 1b and 2 in Annex V) must extend to not less than 45 mm at all points behind a vertical line passing through the centre of the wheel or the first wheel in the case of multiple axles.

Der Abstand zwischen dem obersten und dem untersten Punkt des Spritzschutzsystems (Radabdeckung und Schürze) gemessen an einem beliebigen Querschnitt senkrecht zur Radabdeckung (siehe Anhang V Abbildungen 1b und 2) muss an allen Punkten nach einer vertikalen Linie, die durch die Mitte des Rades oder — bei Mehrfachachsen — des ersten Rades verläuft, mindestens 45 mm betragen.


In the part formed by radial planes at an angle of 30° towards the front and 50° towards the rear of the centre of the wheels (see Figure 1), the overall width (q) of the wheel guard shall be at least sufficient to cover the total tyre width (b) taking into account the tyre envelope as well as the extremes of the tyre/wheel combination(s) as specified by the manufacturer.

In dem Teil, der durch die Radialebenen 30° vor und 50° hinter der Radmitte gebildet wird (siehe Abbildung 1), muss die Gesamtbreite (q) der Radabdeckungen mindestens ausreichen, um die Breite (b) des Reifens unter Berücksichtigung der Reifenhüllkurve und der extremen Bedingungen der Reifen-/Radkombinationen, wie sie vom Hersteller angegeben sind, abzudecken. Im Falle von Zwillingsrädern sind die Reifenhüllkurven und die Gesamtbreite (t) der beiden Räder zu berücksichtigen.


8". twinned wheels" means two wheels mounted on the same axle, the distance between the centres of their areas of contact with the ground being less than 460 mm.

8". Doppelrad" zwei auf einer Achse montierte Räder, bei denen der Abstand zwischen den Mittelpunkten der Aufstandsflächen der Reifen auf der Fahrbahn kleiner als 460 mm ist.


Auxiliary steering equipment (ASE) in which the wheels of axle(s) of vehicles of categories M and N are steered in addition to the wheels providing principal steering input not purely electric, hydraulic or pneumatic, in the same direction or in the opposite direction to the wheels providing principal steering input, and/or the steering angle of the front, centre and/or the rear wheels may be adjusted relative to vehicle behaviour.`; 4. item 2.1. is amended to read as follows:

Hilfslenkanlage, bei der die Räder der Achse(n) von Fahrzeugen der Klassen M und N zusätzlich zu den Rädern, mit der hauptsächlichen nicht rein elektrisch, hydraulisch oder pneumatisch betriebenen Lenkwinkeleingabe in die gleiche Richtung oder in die entgegengesetzte Richtung zu den Rädern, mit der hauptsächlichen Lenkwinkeleingabe gelenkt werden und/oder bei der der Lenkeinschlag der vorderen, mittleren und/oder hinteren Räder entsprechend dem Fahrzeugverhalten eingestellt werden kann".


5.1.2. At all angles of horizontal rotation up to 90° each side of the longitudinal centre line of the device there must be an angle of free axial roll each side of the vertical centre line of 25° for three-wheel vehicles or 40° for two-wheel vehicles.

5.1.2. Bei allen horizontalen Schwenkwinkeln bis zu 90° beiderseits der Längsmittellinie der Vorrichtung muß eine axiale Verdrehung nach jeder Seite der vertikalen Mittellinie von 25° bei dreirädrigen bzw. 40° bei zweirädrigen Fahrzeugen möglich sein.


w