1.3. With the rear view mirror mounted on a flat surface, all of its parts in all positions of adjustment of the device and all of the parts remaining attached to the supporting base after the test provided for in Item 4.2 which are likely to be struck, under static conditions, by a sphere which is either 165 mm in diameter in the case of inside rear view mirrors or 100 mm in diameter in the case of outside rear view mirrors, shall have a radius of curvature 'c` of at least 2,5 mm.
1.3. Ist der Rückspiegel auf einer ebenen Fläche angebracht, müssen sämtliche Teile des Rückspiegels in allen Einstellungen des Rückspiegels sowie sämtliche nach der Prüfung gemäß Abschnitt 4.2 am Fahrzeug verbleibenden Teile, die unter statischen Bedingungen von einer Kugel mit 165 mm Durchmesser im Falle von Innenspiegeln und 100 mm Durchmesser im Falle von Außenspiegeln berührt werden können, einen Abrundungsradius "c" von mindestens 2,5 mm haben.